China Oil-Less Air Cooled Reciprocating Piston Type Hydrogen Gas Compressors for Fuel Filling Stations

Product Description

Advantages of CZPT Process Gas Compressor:
1.   High quality material, Stable & Reliable operation
2.  Low Maintenance cost & Low noise
3.  Easy to install on site and connect with the user’s pipeline system to operate
4.  Alarm automatic shutdown to protection machine function
5.  Corrosion Resistance

Lubrication includes : Oil lubrication, low-oil lubrication and oil free lubrication;
Cooling method includes: Water cooling, and air cooling.
Installation type includes: Stationary and Skid Mounting.

Compressor parameters are detailed in “Reciprocating Compressor Data Table”.
 

Model &Name: DW-10.3/15-57 New Hydrogen Gas Booster Compressor
Structure: D type, Two-column Two-stage, water cooled, Oil Free Reciprocating Piston Compressor
Comrpess medium: H2: 88.1%    C1: 6.0%    C2: 3.5%   C3: 0.3%   iC4: 0.5%   nC4: 0.9%    iC5: 0.4%    nC5: 0.3%    
Flow rate at suction condition 620m3/ h 
Flow rate at standard condition 8460Nm3/h
Atmospheric pressur  945-964 milli bar
Suction pressure: 15bar (G)
Discharge pressure: 57bar (G)
Suction temperature: -9~+42ºC
Discharge temperature:        ≤110 ºC(before cooling)  
Shaft power: ≤461kW
Shaft speed: 420 r/min
Dimension: 6770×3450×3250 mm
weight: ~16t
Altitude 487m
Relative humidity  64-83%
Compressor design refer standard API 618
Painting color can according to client’s requirement to paint

Main Technical Parameters of Main Motor

Motor model:  
Motor type: Y Series, Three Phases, squirrel cage motor totally enclosed, Asynchronism, fan cooled suitable for direct on line starting at ambient temperature of 40˚C
Motor Altitude 1000m
Exproof protection level EXD dIICT4
Motor power: 560KW 
Rated Output power  not less than 110% of the compressor power
Motor speed: 420r/min
Motor voltage: 6kV (ACC.IEC34.1)
Frequency: 50 Hz (ACC.IEC34.1)
Startup mode Direct Start
Protection level: IP 55 (junction box IP55);  
Cos Ø>0.85. Insulation class: F; Temperature rise: Grade B;
Terminal box location Above 
Direction of rotating  Both direction
Motor Cooling system                           IC411

 

Inquiry to us!

Note:for the other customizing process gas compressor, please kindly send below information to our factory to calculate the producing cost for your item.
Clients’ inquiries should contain related parameters 
A. The gas compression medium 
B. Gas composition? or the gas purity?
C. The flow rate: _____Nm3/hr
D. Inlet pressure: _____ Bar (gauge pressure or absolute pressure)
E. Discharge pressure: _____ Bar (gauge pressure or absolute pressure)
F. Inlet temperature
G.Discharge temperature
H. Cooling water temperature as well as other technical requirement.

D-type Reciprocating Compressor

D-type Compressor Specification CZPT has developed models for 2D3.5,2D5.5,2D8,2D12,2D20,2D25,2D32,2D50 and 2D80 series reciprocating piston compressors.  which are stable,reliable and have already been in series and modularized.keepwin can aslo rapidly provide products of other specifications through  modular combination design upon users’ requirements.  
Besides general gas such as air, the compressed medium may also include flammable and explosive gas, such Natural Gas and Coal Gas as well as special gas which are toxic and corrosive. CZPT has taken a series of technical measures in aspects such as structure material, explosion prevention, anto-control and protection to guarantee safety and reliability. Products are widely used in variety of industries such as Petrochemicals, Fine ChemicalsPharmaceutical ChemicalsEnergy ChemicalsMachinery IndustryElectronics IndustryAgricultureAnimal Husbandry and Defense Industry, AstronomyAerospace, Medical and other fields.

 

D type Diaphragm Compressor Technical Parameters
No. Model  Compressed medium F.A.D (Nm3/min) Inlet Pressure 
( Mpa)
Exhuast Pressure 
(Mpa g)
Power 
(KW)
Speed
r/min
Dimension
(L×W×H)mm
N.W 
Weight (t)  
Voltage
V
1 2D3.5W-14/0.3~6 Regenerated hydrogen gas 14N 0.03 0.6 90 485 5200*1800*2500 8 380
2 2D3.5W-5.7/6.5 Regenerated gas 5.7N 0.02 0.65 45 485 5200*1800*2500 5.5 380
3 2D3.5W-17/0.4~12.5 Synthetic tail gas 17N 0.04 1.25 132 485 5200*1800*2500 5.5 380
4 2D3.5W-20/5 Feed gas 20N 0.002 0.5 132 485 5030*2000*2550 4.5 380
5 2D3.5W-25/9~49 Replenish hydrogen 25N 0.9 4.9 132 485 5400*3500*2200 8 380
6 2D3.5W-79/26~49 Recycle hydrogen 79N 2.6 4.9 160 485 5400*3500*2030 8 380
7 2D3.5W-20/0.1~6 Feed hydrogen 20N 0.01 0.6 132 485 4750*2200*2550 4.5 380
8 2D3.5W-54/0.02~0.5 coal gas 54 0.002 0.05 110 585 4560*1800*2550 5.5 380
9 2D3.5W-16.7/0.2~8 Synthetic tail gas 16.7N 0.01~0.04 0.8 132 485 4600*1950*2200 4.5 380
10 2D3.5W-36.7/0.3~2.8 Analytical gas 36.7N 0.03 0.28 160 485 4190*1800*2490 5 380
11 2D3.5W-82/12~22 Recycle hydrogen 82N 1.2 2.2 160 485 4300*1300*1740 5.5 380
12 2D5.5W-30/8 coal gas 30N Micro positive pressure 0.8 220 585 3857*1528*2505 6.5 380
13 2D5.5W-40/8 Coke oven gas 40 Atmospheric pressure  0.8 250 585 3935*2571*2585 6.5 380
14 2D5.5W-40/8~111 Coke oven gas 40N 0.002~0.015 0.8 280 585 3935*2571*2585 6.5 380
15 2D5.5W-80/3.5~12.5 Rich gas 80N 0.35 1.25 280 485 4502*1750*1965 7 380
16 2D5.5W-72/2.5~8.5 Regenerated gas 72N 0.25 0.85 250 485 4040*1750*2380 6.5 10000
17 2D5.5W-30/0.1~7 Hydrogen 30N 0.01 0.7 200 485 4420*1750*2770 6.5 10000
18 2D8W-44/10.2 Reaction gas 44 Micro positive pressure 1.02 315 496 4828*1924*2750 8.7 6000
19 2D8W-65/8~25 Nitrogen gas 65N 0.8 2.5 250 490 4900*3645*2270 11 415

 Test and inspection
1. Part Material Inspection: Before shipment inspecting the mechanical properties and chemical composition of the following parts and provide inspection reports: cylinder, cylinder head, crankshaft, crankcase, main bearing, connecting rod, piston rod, piston rod, cross head, connecting rod bush connecting bolt, cross head pin, etc. 
2. Nondestructive inspection: the supplier shall perform non-destructive inspection of the following parts.
Hydrostatic test and pressure test
The test pressure of cylinder block, cylinder head, piston and other compressed parts is at least 1.5 times of the maximum allowable working pressure, and lasts more than 30 minutes. The test pressure of the above parts of the water chamber is at least 1.5 times the maximum allowable working pressure, not less than 0.6MPa.

Our services:
Keepwin Provides Top-Rated, Efficient Reciprocating Compressors And Parts. Energy Efficient. Industry Leading Warranty. Low Maintenance. Gas Solution Engineer and Easy Install, promises to give a definite reply within 6 hours for the after-sales product service, can provide overseas Installation service. We can customize all kinds of standard air compressor, flammable gas compressor, toxin gas compressor of reciprocating compressor & diaphragm compressor.

What is advantages of our company?
Right Compressor Right Solution Gas Engineer Company
Whether centrifugal, screw or reciprocating, CZPT is the sole multi-compressor provider for you.
The Best Quality, The Most Reliability
What is need to consider when purchase a correct compressor Upgrade Your Gas Compressor to Save Money & Energy Consumption Gas compressors are a vital part of many industry applications.
Save money and energy in your industrial workplace by upgrading your gas compressor today!

     

FAQ
Q1: What’s your delivery time?
A: Generally for standard air compressor is 15 days if there are stocks with regular 380V/50Hz/3ph.
    Special customizing compressors with 30days production date for Screw Compressor, 90days for diaphragm compressor & reciprocating process gas compressor.

Q2: How long is your air compressor warranty?
A: Usually 1 year /12 Months for whole compressor machine, 2years/24months for air end (except maintenance spare parts.). And we can provide further warranty if necessary. 

Q3: How long could your air compressor be used?
A: Generally, more than 10 years.

Q4: Can you do OEM for us?
A: Yes, of course. We have around 2 decades OEM experience.And also we can do ODM for you.

Q5: What’s payment term?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, Trade Assurance and etc. Also we could accept USD, RMB, GBP, Euro and other currency.

Q6: How about your customer service?
A: 24 hours on-line service available. 48hours problem sovled promise.

Q7: How about your after-sales service?
A: 1. Provide customers with intallation and commissioning online instructions.
2. Well-trained engineers available to overseas after-sales service. 

Q8. Are you factory?
A4: Absolutely! You have touched the primary sources of Air /Gas Compressor. We are factory.

How to contact with us?
Send your Inquiry Details in the Below, or Click “Send inquiry to supplier” to check more other Gas Compressor machine equipment!

 

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are 2 different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only 1 cylinder, which means 1 stroke is required to move air from 1 cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the 1 with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have 1 air intake, and two-stage air compressors have 2 air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China Oil-Less Air Cooled Reciprocating Piston Type Hydrogen Gas Compressors for Fuel Filling Stations  China Oil-Less Air Cooled Reciprocating Piston Type Hydrogen Gas Compressors for Fuel Filling Stations

Recent Posts