China Standard Suncenter Screw Gas Station Air Compressor with Mute Mode air compressor repair near me

Product Description

Suncenter Screw Gas Station Air Compressor with Mute mode

SUNCENTER-the globally professional manufacturer of high pressure air compressors, gas compressors, medium and high pressure compressors,high pressure piston/reciprocating compressors, output pressure from 300PSI(2MPa) upto 7250PSI(50MPa),compress air/agron/helium/nitrogen/Natural gas and so on,has been widely used in high pressure testing,hydropower station,military,seismic and oil/gas petroleum industry.

Applications
Pressure test with gas
Gas transfer and filling
(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/CH4/LNG/LPG/CNG etc.)
Charging of gas cylinder and accumulator with nitrogen
Supply for isolating gas systems
Gas assisted injection molding
Transfer of oxygen cylinders
Charging of breathing air bottles
Leak test
Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft components

Natural Gas Compressor

Suncenter Natural Gas Compressors are very cost-effective for handling high volumes of gas in gas gathering, vapor recovery, and other applications. Natural Gas compressors are ideal in large volume/low suction pressure applications and to upgrade existing reciprocating compressor installations. Since they operate with few moving parts, low maintenance and high reliability are inherent in rotary screws.

Features 
•Skid with Market Proven US made Gas Ends.
•Versatrol Internal Bypass Valves(Option)
•VFD Control(Option)
•Wide Range of Capacity Control,Fully Automatically.
•All Climate Design, Even For Tough Environment.
•Full-automatic control can realize the system running without anyone on duty.
•Adjustable Vi matches the internal compression to the application requirement for maximum compression efficiency.
•6000V/10000V Explosion-proof Motor CHINAMFG request.
 

Air/Nitrogen gas compressors

Suncenter air/nitrogen gas compressor with reliable compression bare blocks, modular design, various blocks, and cylinders are optional; reasonable matching of compression stages and cylinder sizes according to compression ratio, ensuring each stage to be with low-pressure ratio and low operating temperature.
•Working pressure from 2 to 50MPa
•Complete suction protection for real-time monitoring of intake pressure, discharge pressure and temperature
•Advanced pressure-bearing crankcase and condensate drain collection system for zero blow-by of the unit
•Fully automatic PLC control system for unattended operation of the unit
•A variety of driving methods, whether it is a motor drive or diesel drive, both can ensure efficient operation of the unit
•Different discharge filter systems and dry systems are available to meet different purity and dryness requirements.
•Time-tested professional design, simple installation, no require an additional foundation.

Helium/Argon Compressor

Features
High-performance compressor system for rare gaseous gases, compressing, purifying, storing, distributing and recovering.
Suncenter compressors are specially designed for the rare gas. The crankcase resists 2.5bar, prevent gas losses, and special blowby recovery system is standard equipped. Low compress ratio and big size outlet of each stage are designed to reach low interstage temperature, and big capacity cooler is equipped for high compress heat of rare gas.
•1.5–7NM3/min 20–35MPa
•Air-cooled or Water-cooled cooler design, meet a variety of application requirements
•Diesel Engine drove CHINAMFG request  
•Full Range Products for various demands
•The time-tested professional design.

Advantage
The universal modular design brings more flexibility and simplicity for the adjustment of the piston, cylinder, cylinder head and valves with so that we can provide customers with the most efficient and economical system. Our design features and advantages determine our unit able to withstand the test of time and get the user’s approval.
•Easy to install and maintain
•Low maintenance and operating costs
•No special foundation requirements
•Pressurized crankcase to reduce the gas leakage
•High pressure
•Dynamic balance design
•Low vibration
•Low compression ratio and temperatures rise
•Efficient
•Suitable for continuous or intermittent operating conditions
•Low speed in order to extend the service life

How to Select Suncenter Gas compressors?

In order to choose a suitable model for you, please kindly reply to us the following questions:

1. What is your present gas pressure? (    )bar

2. What is the gas do you need to compressAirnatural gas or nitrogen gas or other gases?

3. What is the max outlet gas pressure do you need? (    )bar

4What is the outlet gas flow rate do you need? (    )Nm3/min

If you are interested in any of our products, please feel free to contact us.
We could also make customized products according to your special requirements.

Why choose Suncenter:
-1. 15 years of manufacturing experience history. 
-2. faster lead time, the fastest delivery is about 10-15 working days.
-3. CE & SGS certificate approval factory.
-4. Quality control for every step while production.
-5. Professional engineers have working experience in Maximator.

Customer Review:



About Suncenter

HangZhou Suncenter Fluid Control Equipment Co., Ltd is the member company of Suncenter Group, which is located in HangZhou city of ZheJiang province in China. With more than 15 years experiences in fluid pressure exchange and controlling field, we provide various kinds of high pressure booster pumps, systems and solutions to the customers all over the world. Due to our best product quality, competitive price as well as excellent after-sales service, we have win a great reputation in the field.
 
Our main products including:
High Pressure Booster Pumps ( Gas Booster Pump, Air Driven Liquid Pump, Air Amplifiers)

High Pressure Systems (Gas/Liquid Booster System,Gas compressors,Hydro test bench,
Chemical injection system,CO2/FM200 filling machine, Tube Expanding Machine)

High Pressure Test Equipment(Hydraulic/Burst/Hydrostatic test machine,Cylinder test machine, Valve test bench,Impulse Testing Machine, etc.)
 

Product Application
Oil Industry, Gas Industry, Chemical Industry, Fire Fighting, Research Institutions etc.
  

Our service
13 months’ free warranty since the purchasing date and free technical support during lifetime

Certifications

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Pressure Medium: Gas
Type: Desktop
Position of Pump Shaft: Horizontal
Certification: CE, ISO
Application: Oil Industry, Gas Industry
Impact Pressure: 80-1500kgs
Customization:
Available

|

air compressor

How Do You Troubleshoot Common Issues with Gas Air Compressors?

Troubleshooting common issues with gas air compressors involves identifying and addressing potential problems that may arise during operation. Here’s a detailed explanation of the troubleshooting process:

1. Start with Safety Precautions:

Prior to troubleshooting, ensure that the gas air compressor is turned off and disconnected from the power source. Follow proper safety procedures, such as wearing appropriate personal protective equipment (PPE), to avoid accidents or injuries.

2. Check Power Supply and Connections:

Verify that the compressor is receiving power and that all electrical connections are secure. Inspect the power cord, plug, and any switches or controls to ensure they are functioning properly. If the compressor is equipped with a battery, check its charge level and connections.

3. Check Fuel Supply:

For gas air compressors that use gasoline or propane, ensure that there is an adequate fuel supply. Check the fuel tank level and verify that the fuel shut-off valve is open. If the compressor has been sitting idle for an extended period, old or stale fuel may cause starting issues. Consider draining and replacing the fuel if necessary.

4. Inspect Air Filters:

Dirty or clogged air filters can restrict airflow and affect the compressor’s performance. Check the intake air filters and clean or replace them as needed. Clogged filters can be cleaned with compressed air or washed with mild detergent and water, depending on the type of filter.

5. Check Oil Level and Quality:

If the gas air compressor has an engine with an oil reservoir, verify the oil level using the dipstick or oil level indicator. Insufficient oil can lead to engine damage or poor performance. Additionally, check the oil quality to ensure it is clean and within the recommended viscosity range. If needed, change the oil following the manufacturer’s guidelines.

6. Inspect Spark Plug:

If the gas air compressor uses a spark plug ignition system, inspect the spark plug for signs of damage or fouling. Clean or replace the spark plug if necessary, following the manufacturer’s recommendations for gap setting and torque.

7. Check Belts and Pulleys:

Inspect the belts and pulleys that drive the compressor pump. Loose or worn belts can cause slippage and affect the compressor’s performance. Tighten or replace any damaged belts, and ensure that the pulleys are properly aligned.

8. Listen for Unusual Noises:

During operation, listen for any unusual or excessive noises, such as grinding, rattling, or squealing sounds. Unusual noises could indicate mechanical issues, loose components, or improper lubrication. If identified, consult the compressor’s manual or contact a qualified technician for further inspection and repair.

9. Consult the Owner’s Manual:

If troubleshooting steps do not resolve the issue, refer to the compressor’s owner’s manual for specific troubleshooting guidance. The manual may provide additional troubleshooting steps, diagnostic charts, or recommended maintenance procedures.

10. Seek Professional Assistance:

If the issue persists or if you are unsure about performing further troubleshooting steps, it is recommended to seek assistance from a qualified technician or contact the manufacturer’s customer support for guidance.

Remember to always prioritize safety and follow proper maintenance practices to prevent issues and ensure the reliable performance of the gas air compressor.

air compressor

Can Gas Air Compressors Be Used for Natural Gas Compression?

Gas air compressors are not typically used for natural gas compression. Here’s a detailed explanation:

1. Different Compressed Gases:

Gas air compressors are specifically designed to compress atmospheric air. They are not typically designed or suitable for compressing natural gas. Natural gas, which is primarily composed of methane, requires specialized compressors designed to handle the unique properties and characteristics of the gas.

2. Safety Considerations:

Natural gas compression involves handling a flammable and potentially hazardous substance. Compressing natural gas requires specialized equipment that meets stringent safety standards to prevent leaks, minimize the risk of ignition or explosion, and ensure the safe handling of the gas. Gas air compressors may not have the necessary safety features or materials to handle natural gas safely.

3. Equipment Compatibility:

Natural gas compression systems typically include components such as gas compressors, gas coolers, separators, and control systems that are specifically designed and engineered for the compression and handling of natural gas. These components are built to withstand the specific demands and conditions associated with natural gas compression, including the high pressures and potential presence of impurities.

4. Efficiency and Performance:

Compressing natural gas requires specialized compressors that can handle the high-pressure ratios and volumetric flow rates associated with the gas. Gas air compressors are generally not designed to achieve the same compression ratios and performance levels required for natural gas compression. Using gas air compressors for natural gas compression would likely result in inefficient operation and suboptimal performance.

5. Regulatory Compliance:

Compressing natural gas is subject to various regulations and standards to ensure safety, environmental protection, and compliance with industry guidelines. These regulations often dictate specific requirements for equipment, materials, and operating procedures in natural gas compression systems. Gas air compressors may not meet these regulatory requirements for natural gas compression.

6. Industry Standards and Practices:

The natural gas industry has well-established standards and best practices for equipment selection, installation, and operation in gas compression systems. These standards are based on the specific requirements and characteristics of natural gas. Gas air compressors do not align with these industry standards and practices, which are essential for safe and efficient natural gas compression.

In summary, gas air compressors are not suitable for natural gas compression. Natural gas compression requires specialized equipment designed to handle the unique properties and safety considerations associated with the gas. Compressors specifically engineered for natural gas compression offer the necessary performance, safety features, and regulatory compliance required for efficient and reliable operation in natural gas compression systems.

air compressor

How Do You Choose the Right Size Gas Air Compressor for Your Needs?

Choosing the right size gas air compressor is crucial to ensure optimal performance and efficiency for your specific needs. Selecting a compressor that is too small may result in insufficient airflow or pressure, while choosing one that is too large can lead to unnecessary energy consumption and higher costs. Here’s a detailed explanation of the factors to consider when choosing the right size gas air compressor:

1. Required Airflow:

Determine the airflow requirements of your applications. Consider the tools, equipment, or processes that will be powered by the compressor and their respective airflow demands. The required airflow is typically measured in cubic feet per minute (CFM). Determine the total CFM required, taking into account any simultaneous or intermittent tool usage.

2. Operating Pressure:

Identify the operating pressure required for your applications. Different tools and systems have specific pressure requirements, measured in pounds per square inch (PSI). Ensure that the compressor you choose can deliver the required pressure consistently.

3. Duty Cycle:

Consider the duty cycle, which refers to the amount of time the compressor will be in operation within a given period. Some applications may require continuous operation, while others involve intermittent or occasional use. Take into account the duty cycle to ensure that the compressor can handle the expected workload without overheating or experiencing excessive wear.

4. Tank Size:

The tank size of a gas air compressor determines its ability to store compressed air and provide a steady supply. A larger tank can help accommodate fluctuations in demand and reduce the frequency of the compressor cycling on and off. Consider the required storage capacity based on the specific applications and the desired balance between continuous operation and storage capacity.

5. Power Source:

Gas air compressors can be powered by different fuels, such as gasoline, diesel, natural gas, or propane. Consider the availability and cost of the fuel options in your location, as well as the specific requirements of your applications. Choose a compressor that is compatible with a power source that suits your needs.

6. Portability:

Determine if portability is a requirement for your applications. If you need to move the compressor to different job sites or locations, consider a portable model with features like wheels, handles, or a compact design that facilitates easy transportation.

7. Noise Level:

If noise is a concern in your working environment, consider the noise level of the compressor. Gas air compressors can vary in their noise output, and certain models may have noise-reducing features or insulation to minimize sound emissions.

8. Manufacturer Recommendations:

Consult the manufacturer’s recommendations and guidelines for selecting the appropriate compressor size for your specific needs. Manufacturers often provide guidelines based on the anticipated applications, airflow requirements, and other factors to help you make an informed decision.

By considering these factors and carefully assessing your specific requirements, you can choose the right size gas air compressor that meets your airflow, pressure, duty cycle, and other operational needs. It’s advisable to consult with industry professionals or compressor experts for guidance, especially for complex or specialized applications.

China Standard Suncenter Screw Gas Station Air Compressor with Mute Mode   air compressor repair near meChina Standard Suncenter Screw Gas Station Air Compressor with Mute Mode   air compressor repair near me
editor by CX 2024-02-04

Recent Posts